Waveguide-post-filter


Autor/Urheber:
Größe:
3648 x 2736 Pixel (1375367 Bytes)
Beschreibung:
Five-resonator triple-post waveguide bandpass filter made by Ferranti. A length of WG15 (WR112) is divided into five coupled resonant cavities, by fences of three posts each. Each of the two end-cavities is separated from its respective port by a single post and a short adjustment screw. The ends of the posts protrude through each broad-wall of the guide, making them clearly visible from the outside. The resonators are each about 30 mm long and have a central tuning screw. All seven screws are secured by jam-nuts and thread-lock and are normally protected by plastic caps (removed for the photo).

Centre frequency 7.200GHz

Dimensions / mm (averaged and with spurious last digit)

Along guide (post-diameter)<---post-centre-to-centre-distance--->(post-diameter):

(3.18)<---29.40--->(2.82)<---31.34--->(3.18)<---31.55--->(3.18)<---31.34--->(2.82)<---29.40--->(31.8)

Fence pitch across guide: 7.11

Tuning screw diameter: 3.95, insertion ~2

End screw diameter ~2.2, insertion ~2

Guide: WG15-ish (tapers too narrow to too wide)
Lizenz:
CC0
Bild teilen:
Facebook   Twitter   Pinterest   WhatsApp   Telegram   E-Mail
Weitere Informationen zur Lizenz des Bildes finden Sie hier. Letzte Aktualisierung: Thu, 31 Aug 2023 03:45:04 GMT

Relevante Bilder


Relevante Artikel

Hohlleiterfilter

Ein Hohlleiterfilter ist ein in der Mikrowellentechnik eingesetztes passives Filter in Form eines speziell ausgestatteten Hohlleiters. Es dient dazu bestimmte Frequenzen der sich im Hohlleiter ausbreitenden elektromagnetischen Welle zu unterdrücken oder passieren zu lassen. Anwendungen liegen unter anderem als Baugruppe bei größeren Sendeanlagen, Radaranlagen und bei Kommunikationssatelliten. Beispielsweise werden Hohlleiter als ein Teil eines Diplexers eingesetzt, um das Sende- vom Empfangsfrequenzband an einer Antenne zu trennen. .. weiterlesen